Tension load cells
High precision measurement of vessel weights and forces
from 100 kg up to 20,000 kg
We work with you to optimise the concept to measure forces and the weighing of your containers
Place your request for a quotation now and we will be pleased to give you individual advice on your application.
Immediate advice: +49 (0) 29 61 – 96 56 86
MBE EWB Ltd.
Evonik GmbH
Scheuch GmbH
Milupa GmbH
The added value to you
Precise
Excellent measurement accuracy (0.015% combined error)
Excellent measurement accuracy (0.015% combined error)
Optimum force transmission
Options available
Can be supplied in stainless steel or tool steel
Cost-effective
Economically-priced methods for high precision weighing
Comprehensive
Measuring ranges from 20 kg up to 20 t with optional tensile load suspension
Optional
ATEX approval for Zones 1/21 and 2/22 (no barriers required for Zone 22)
Why are tensile load measuring cells the right choice for my plant?
With the benefit of our many years of experience we assist you in selecting the optimum weighing module for your application.
Place your request for an offer now and we will be pleased to help you:
+49 (0) 29 61 – 96 56 86
You are probably familiar with the following situation:
You need to measure exactly the contents of a suspended container or crane load.
You want to weigh a belt conveyor or a screw-conveyor.
The ideal solution:
Our tensile load measuring cells have been developed for these applications and for the precision measurement of tensile forces.
Forces from a few grams up to 20 t can be measured exactly using tensile load cells.
Frequently one measuring cell is sufficient to record containers, belt conveyors or screw-conveyors in conjunction with counter bearings, swivel joints or end-stop buffers.
Upon request, we will gladly send you a series of information about our products, starting with the access to our data sheets.
How do the tensile load measuring cells work?
Tensile load measuring cells are manufactured either from flat steel or as a folded shear beam.
The force is transmitted through threaded rods with an eye and/or swivel or ring eyelets.
Tensile loads offer an optimum opportunity to introduce forces exactly vertically and centrally into a load cell.
There are simple mechanical aids to protect the load cells from swinging or overload.
Technical data
Measurement ranges:
20 kg, 50 kg, 100 kg,
500 kg, 1 t, 2 t,
5 t, 7.5 t, 10 t, 20 t
Supply:
5 – 12 VDC, max. 15 V
Output signal:
2 mV/V / 4 – 20 mA
Linearity error:
0.02% max.
Hysteresis:
0.0015%
Reproducibility:
0.002%
Overload protection:
150% of the nominal load
Output resistance:
350 Ohm
Working temperature range:
-35°C to +80°C
Compensated Range:
-10°C to +45°C
Insulation resistance:
> 2,000 MOhm
Ex approval [optional):
ATEX Zones 1/21 and 2/22 (Zone 22 without barriers)
